 |
| This is just to show how to mount the bike when you have a really stuck stem. If it wasn’t as stuck I would usually put an old wheel on there, straddle it with my thighs and torque away. In this case though, I don't want to risk bending the fork so I mounted it where the crown is. |
 |
| I wrapped a tube around the crown so i don't scratch it up with the vise. |
 |
| DUH! WINNING! |
| If you still can’t get it out then you can remove the handlebar and get a nice pipe over the stem for some serious leverage. If that still doesn't work then try to soak it some more in the penetrating solution of your choice. NOTE: before I did this procedure I’ve soaked the steerer tube in PB blaster for 2 days! Don’t forget to do that. This is how it looks when soaking HERE |
Search This Blog
- SRAM Shift Lever Tuning
- SRAM Force RD Tuning
- Isaac Force Build
- Cleaning KCNC Calipers
- Tuning Campy Record FD's
- Addict Built
- Ruegamer Build
- Muriatic acid for broken posts
- Roll Out Dents
- Remove Seized Seatposts
- Remove Seized Stems
- Determine Your Bike Size
- Cranks & Bottom Brackets
- Quill Stem Basics
- Tune Derailers
- Tires and Tubes
- Remove Tight Fitting Tires
- Remove & Install Chains w.o. chain tool
- Cantilever Brakes