 |
| Just when I had the filler just right and even a deep long crack started to form in the stuff. You can see the faint line in the picture. I decided to stop using this junk, sanded all of the weak parts off, and went to an old and more familiar solution. |
 |
| JB WELD! The ghetto fabricator’s form of welding. |
 |
| This stuff adheres way better than the last and flows way better too. It just takes awhile longer (6 hours as opposed to 3) to set. Hopefully this will all be done tomorrow. Previous Part Next Part |
Search This Blog
- SRAM Shift Lever Tuning
- SRAM Force RD Tuning
- Isaac Force Build
- Cleaning KCNC Calipers
- Tuning Campy Record FD's
- Addict Built
- Ruegamer Build
- Muriatic acid for broken posts
- Roll Out Dents
- Remove Seized Seatposts
- Remove Seized Stems
- Determine Your Bike Size
- Cranks & Bottom Brackets
- Quill Stem Basics
- Tune Derailers
- Tires and Tubes
- Remove Tight Fitting Tires
- Remove & Install Chains w.o. chain tool
- Cantilever Brakes