| Previous |
 |
| I’ve given it some thought and can’t figure out any ways to make the hood removable other than slitting it down the middle like I did. With that, I’ll be lacing it punk rock style. |
 |
| Getting the carbon sheet just about the right size before the rubber application. |
 |
| Something I did different this time around was that I applied a smooth thin layer of rubber with the aerosolized version first. I’m hoping this will make for a smoother inner hood. After that I had to hurry so no pics were taken but I simply applied a good amount of rubber on top of the sprayed layer. After a good amount was applied I laid the carbon sheet on and repeated what I did in the previous section. |
 |
| Now they’re waiting to dry. Hopefully this works out well! Next |
Search This Blog
- SRAM Shift Lever Tuning
- SRAM Force RD Tuning
- Isaac Force Build
- Cleaning KCNC Calipers
- Tuning Campy Record FD's
- Addict Built
- Ruegamer Build
- Muriatic acid for broken posts
- Roll Out Dents
- Remove Seized Seatposts
- Remove Seized Stems
- Determine Your Bike Size
- Cranks & Bottom Brackets
- Quill Stem Basics
- Tune Derailers
- Tires and Tubes
- Remove Tight Fitting Tires
- Remove & Install Chains w.o. chain tool
- Cantilever Brakes